This page provides an English interface to the gxceed GX paper corpus. The corpus aggregates papers from 14 contributing scholarly metadata sources and uses AI-assisted classification to identify signals related to measurement, policy narratives, outcomes, implementation, industrial adoption, and verification.
The goal is not only to discover papers, but to observe how GX research is distributed across research substance, implementation narratives, external expectations, implementation substance, and judgment formation.
Summaries are AI-assisted. Always refer to the original paper for authoritative conclusions.
Showing 401–420 of 2836 papers
Prachi R. Patel
Parallel Carbon has unveiled a technology integrating direct air capture (DAC) with water electrolysis. The approach aims to combine carbon removal and hydrogen production in a single system. No peer-reviewed data or quantitative performanc…
Jingjie Ye, Xiangen Zhao, Yang Liu +4
A materials study on carbon fibre electrodes for electrochemical CO2 reduction to CO. It targets O2-free CO production in a low-voltage, high-temperature arc regime, an enabling component for CO2 utilisation (CCU). Detailed findings are una…
Islam Orynbassarov, Temirlan Barissov, Seunghee Kim +1
Cement and concrete cause ~8% of global CO2 emissions. This study shows biochar from distillers' grain, corn stover, and wood waste can be blended into cement at up to 20% by mass while maintaining or improving compressive strength, with a …
Di Tommaso, Devis
Version 4.3 of a steady-state mass-balance model suite for electrochemical CO₂-to-acetic acid conversion via a tandem CO₂→CO→AcOH chain. It corrects v4.2's carbon-balance failure (closure now 1.000) by fixing fresh-CO calculation and includ…
A. Muhammed, Mubashir Ameen Kottappadath, Aswathy Jaya +2
This study analyzes CO2 absorption into aqueous NaOH using a wetted wall column across 18 runs (CO2 10–26%, NaOH 0.5–1 M). Solvent concentration and flow conditions significantly enhance the mass transfer coefficient and absorption efficien…
S. Premkumar, N. Hasan, R. Madhava Perumal +3
A lab-scale study of carbon-capturing bituminous pavement (CCBP) incorporating Bacillus subtilis, hydrated lime, and TiO2. Urease-driven carbonate precipitation with Ca2+ yielded 104.8 g CO2/m2 over 28 days and a 9.35% dynamic modulus gain.…
Sirous Hosseinzadeh, Alireza Rezagholilou, Saeed Salimzadeh +3
A 3D geomechanical model of the South-West Hub CCS reservoir in Western Australia integrated seismic, dynamic-simulation, and 1D mechanical-earth data, with 4D finite-element analysis tracking stress and deformation during CO2 injection. Fa…
Joonhee Ma, Jae Hak Kim, Mojtaba Abdi‐Jalebi +1
This review comprehensively examines the rational design of biochar for CO2 capture and subsequent catalytic conversion. It covers synthesis and activation strategies, physisorption/chemisorption mechanisms via pore modification and heteroa…
Mosca, Marco, Mosca, Roberto, Miroglio, Tiziano +1
A Python model screening five uses of biogenic CO2 from a planned 80 kWe sawmill wood-gasification CHP unit: greenhouse enrichment, precipitated calcium carbonate, carbonation of EAF slag or recycled-concrete fines, and e-methanol. It compu…
Wang G.
This paper analyzes a large-scale CCUS-EOR project from technical and economic perspectives, examining its feasibility and challenges. It offers insights into CCUS implementation costs, profitability, and policy support, discussing how deca…
Zhang Y.
This study combines life cycle assessment with multi-objective optimization for a CCUS-integrated methanol-reforming PEMFC combined cooling, heating and power (CCHP) system. It optimizes trade-offs among energy efficiency, environmental bur…
Linjala O.
This study spatially allocates biogenic CO2 supply and demand for CCUS in Finland under multiple scenarios. It examines geographic matching between biomass-derived CO2 sources and capture/utilization/storage sites, offering implications for…
S. Chai, B. S. How, L. Ngu
This study evaluates a CCU process that mineralizes cement kiln dust (CKD) with captured CO2 to produce green bricks (CKD-BLB) via techno-economic analysis. A multi-objective stochastic optimization found an optimal absorber size of 67.93 m…
Neha Mohiuddin, Akshit Kumar, Rajesh Yadav +2
This study optimizes CO2 capture from humid industrial flue gas using amine-functionalized Zr-MOF-808 via statistical process design. It demonstrates efficient, stable adsorption performance even under moisture, advancing practical CCUS dep…
Suoyi Zhao, Xiaojuan Liang, Jie Sun +5
This study develops a copula-based probabilistic framework to optimize negative emission technology (NET) portfolios in Northwest China under dual economic and environmental discounting. It evaluates combinations such as BECCS and DACCS und…
Omran Abushammala, Rainier Hreiz, Cécile Lemaître +3
This work develops a hydrodynamic design methodology for cross-flow hollow fiber membrane contactors (HFMC) enabling low-pressure CO2 capture via physical absorption. Using Ergun and Hagen-Poiseuille pressure-drop models, optimal bundle dim…
Xiaoyu Li, Jie Chen, Bo Zhang +1
This work develops amine-montmorillonite composite aerogels formed via polyethyleneimine-induced gelation as solid sorbents for CO2 capture. The clay-amine composite design targets high-performance, sustainable carbon capture. Quantitative …
Lu Shi, Dandan Liu, Wanying Wang +1
Lignin-based N-doped porous carbons were prepared via mechanochemical-assisted activation using four nitrogen sources. The melamine-derived sample achieved 4.25 mmol/g CO2 uptake at 273 K/1 bar with CO2/N2 selectivity of 11 and stable cycli…
Shiv Sai Trivedi, Karthik Goud, Sijil Joy +3
This study valorizes recycled concrete fines (RCF) via mineral carbonation, permanently storing CO2 while producing low-carbon mortars reinforced with carbon nanofibers. It demonstrates a circular construction-material pathway that couples …
N. A. Thomas, Dona Aristo, Batchu Radhika Krishna +6
This study synthesises binary and ternary nanohybrids based on bio-derived MOFs with metallic and metal-oxide components for photocatalytic CO2 reduction to gaseous fuels under visible light. Materials were characterised via FE-SEM/EDS, XRD…
Browse by Topic