This page provides an English interface to the gxceed GX paper corpus. The corpus aggregates papers from 14 contributing scholarly metadata sources and uses AI-assisted classification to identify signals related to measurement, policy narratives, outcomes, implementation, industrial adoption, and verification.
The goal is not only to discover papers, but to observe how GX research is distributed across research substance, implementation narratives, external expectations, implementation substance, and judgment formation.
Summaries are AI-assisted. Always refer to the original paper for authoritative conclusions.
Showing 261–280 of 2836 papers
Muhammad Awais
This PhD thesis presents the first systematic DFT study of transition metal carbonitrides (TMCNs) as catalysts for electrochemical CO2 and CO reduction to green fuels. Analyzing 33 surfaces across 11 TMCNs and over 2000 reaction pathways, i…
Daniele Possanzini, A. Zucca, M. Provenzale +2
This study develops a laser-based ignition device for the Allam cycle, an oxy-combustion process combining efficient power generation with CO2 capture under high-pressure, high-temperature conditions. It details design features, integrity m…
Yurou Celine Xiao, S. Sun, Rui K. Miao +4
This piece addresses the industrialization of reactive capture of CO2, an integrated approach that converts captured CO2 directly into products rather than separating it first. It likely discusses scale-up, cost, and deployment pathways for…
Yong Pan, Su-Wen Hu, Yong Zhou +4
A comparative study of ten MOF-based porous liquids for SO2 capture identifies CALF-20/NHD as optimal, with 0.12 mol/L uptake at 0.1 bar, SO2/N2 and SO2/CO2 selectivities of 562 and 51, and low uptake enthalpy (30.44 kJ/mol). Performance is…
Kyoko Nozaki
A study reporting a strain-based approach to converting carbon dioxide into circular polyesters. Though no abstract is available, it sits within CCU-style decarbonization, turning CO2 into a recyclable material feedstock. If scalable, it co…
Suryanarayana Regulagadda, Gode Thrimurthulu, Taraka Rama Prasadu Vasa +4
This work proposes renewable-carbon strategies for sustainable bioplastics by combining biomass valorization with CO2 utilization. It links feedstock and carbon sourcing to structural property relationships, aiming to reduce fossil-carbon d…
Zhaoyu Yang, Suxia Ma, Guanjia Zhao +1
This study designs a staged heat-supply scheme for MEA post-combustion CO2 capture on a 600 MW coal unit, using compression heat pumps and flue-gas waste heat instead of high-grade extraction steam. Coupled Ebsilon/Aspen Plus simulations wi…
Jinliang Cai, Jianchao Zhang, Zhiyong Peng +2
This review surveys carbon-based adsorbents for CO2 capture, covering pore engineering, surface modification, and composite design, and compares representative studies. It then examines machine learning across descriptor construction, predi…
Sahar Ahmed, Fares Almomani, Ibnelwaleed Hussein
A study designing betaine-based deep eutectic solvents (DES) for CO2 capture from LNG, screening their thermodynamic performance and safety. It explores greener solvent options for carbon capture implementation. Details are limited as no ab…
Milad Sohrabi, Saeed Eini, Davood Rashtchian
This study models and evaluates direct ocean carbon capture (DOCC) using a continuous porous electrode reactor. It appears to focus on electrochemical and mass-transport modeling to assess capture performance. Details are limited as no abst…
Yohanes Kristianto Nugroho
Proposes a multiscale engineering design framework for systems integrating carbon capture with renewable hydrogen. Details are unavailable without an abstract, but the work targets integrated CCUS-hydrogen design relevant to decarbonization…
Shanhe Gong, Qing Xia, Yanjie Zhai +12
A modular PEM–porous solid electrolyte (PSE) reactor directly converts captured bicarbonate to CO, avoiding energy-intensive CO2 release and compression. In situ visualization shows the PSE regulates proton transport, suppresses hydrogen ev…
Peter Agbo
CO2 hydration to bicarbonate is often rate-limiting for aqueous CO2 capture, and carbonic anhydrase (CA) catalyzes exactly this step. This work engineers fast-growing marine cyanobacteria to display CA on the cell envelope, yielding a self-…
Benjamin Duheric
PhD thesis developing carbon xerogel adsorbents for CO2 capture in blue hydrogen production from natural gas. Thermal treatment tuning revealed a trade-off between saturation capacity and adsorption affinity; ACX-800 achieved 2.99 and 2.05 …
Cleo Klossner, Hanxiong Lyu, Dingqiang Fan +2
A fully waste-derived C2S binder was synthesized by low-temperature sintering of 55% carbide slag and 45% waste glass powder at 1100°C, where Na2O in the glass acts as a flux. Carbonation curing for 5 h yielded 58.6 MPa compressive strength…
Chao Jin, Jingyao Li, Xuan Zhang +6
This study holistically assesses the optimal deployment timing of carbon dioxide removal (CDR) in China under its carbon neutrality target. It examines how the timing of CDR scale-up affects costs and decarbonization pathways, informing pol…
Merfort A, de Jonge-Anderson I, Dorndorf T +7
Using the REMIND integrated assessment model with upscaling-constrained carbon storage pathways, the authors assess 1.5°C mitigation scenarios. Even under optimistic assumptions, geological carbon storage and novel CDR contribute only 32–51…
Kantouros, Babis, Prousalis, Thomas, Tsivintzelis, Ioannis +2
This study builds a cost-minimization optimization framework for a rotating packed bed (RPB) CO2 capture system applied to cement and natural gas flue gases. It compares amine solvents and operating conditions to quantify the drivers of cap…
Jung Sug Hong, Hyunji Yu, Jun Ho Jang +5
A solvent-free carbon capture process using a composite NaOH–sodium percarbonate sorbent captures both ambient CO2 (~420 ppm) and industrial flue gas (1–33 vol%) in one sequential platform. Humidity-activated Na2O2 formation fully converts …
Jiang Luo, Michael J. Cave
This study designs a novel exhaust-gas-recirculation (EGR) mixer for industrial gas turbines with CCS, using CFD (STAR-CCM+ with RANS turbulence models) to model multi-component turbulent mixing. Through iterative design, a unique mixer box…
Browse by Topic