This page provides an English interface to the gxceed GX paper corpus. The corpus aggregates papers from 14 contributing scholarly metadata sources and uses AI-assisted classification to identify signals related to measurement, policy narratives, outcomes, implementation, industrial adoption, and verification.
The goal is not only to discover papers, but to observe how GX research is distributed across research substance, implementation narratives, external expectations, implementation substance, and judgment formation.
Summaries are AI-assisted. Always refer to the original paper for authoritative conclusions.
Showing 981–1000 of 1903 papers
Huang J.
This paper proposes an efficiency optimization model for coal-fired power plants equipped with carbon capture and storage (CCS) operating under emissions trading markets. It analyzes the trade-off between power generation efficiency and CO2…
Ali U.
A review of amine-based materials for CO2 capture, covering material properties, applications, and challenges for industrial-scale CCUS deployment.
Huaigang Cheng, Ruirui Hou, Yanli Wang +3
This study develops an integrated physical decontamination and mineralization process for calcium carbide slag, a highly alkaline solid waste from acetylene production. Through calcination, magnetic separation, sedimentation, and CO2 minera…
Yang Yang, O. Kırtel, S. Badino +8
This study explores biocatalytic acceleration of solvent regeneration in CO2 capture. A discovered amidase (PcAmd) hydrolyzes MEA carbamate, increasing initial CO2 release rate by ~20% and halving the time to release 80% of captured CO2. Po…
N.N. Chigambayeva, A.Y. Nurmukan, A. Aldiyarov +2
This experimental study investigates the absorption of CO, CO2, and CH4 by water cryocrystals under ultra-low temperature and vacuum conditions. Using TPD, MS, and laser interferometry, it demonstrates the capacity of different ice phases t…
Suresh Kumar Govindarajan
This paper questions whether CCS can serve as the primary mitigation method for hard-to-abate sectors like cement and steel, where process emissions are unavoidable through fuel-switching or electrification. It discusses the effectiveness a…
Eleni Lamprou, Fani Stergioudi, G. Skordaris +4
This study evaluates corrosion inhibitors for S275 carbon steel in MEA-based CO2 capture systems. NaVO3 and CuSO4 achieve up to 98% inhibition efficiency, offering a cost-effective alternative to stainless steel.
Zaineb Beji, Wahid Djeridi, W. Ahmed +4
This study synthesizes and compares three carbon-based adsorbents for CO2 and CH4 capture. Activated carbon from olive stones shows highest uptake (6.41 mmol/g CO2), while nickel-modified xerogels exhibit superior surface-normalized efficie…
Krutarth Pandit, Ishani Karki Kudva, Shekhar G. Shinde +2
This study presents an integrated Chemical Looping Fischer-Tropsch (CLFT) pathway for biomass-to-liquid fuels with inherent CO2 capture. Process simulations and bench-scale experiments confirm autothermal operation, high-purity syngas and s…
Pengyao Yu, Soryong Chae, Chunzheng Wang +5
This review examines zeolite membrane reactors (ZMRs) for converting CO2 into high-value chemicals (methanol, dimethyl ether, dimethyl carbonate). It covers catalyst evolution, membrane selection and preparation, process modeling of reactio…
Sudip Sharma, Thomas A. Adams
This paper presents an open-source IDAES model for Magnetic Inductive Swing Adsorption (MISA) for CO2 capture, incorporating Specific Absorption Rate (SAR) physics. Validated against experiments, it predicts breakthrough time with 9% error …
Yicheng Ma, Tao Liu, Chunxing Li +1
This paper reviews the state-of-the-art and future prospects of converting methane (a potent greenhouse gas) into microbial protein. This technology aims to reduce methane emissions while providing a sustainable protein source. Challenges i…
Gavin Liu
This review summarizes recent advances in decarbonization technologies: CO2-EOR, geological hydrogen, and critical minerals. It highlights the growing use of AI/ML and identifies research gaps in field-scale viability.
RAUL LORENZO QUIJADA, Jenifer Vaswani Reboso, Sebastián Ovidio Pérez Báez +2
This study integrates activated sludge kinetics with microalgae culture to reduce GHG emissions in wastewater treatment plants (WWTPs). Using experimental data and real plant parameters, it models CO2 capture and aeration reduction via micr…
Zhiqin Ma, Bai Feng, Jingrui Fang +3
This study compares carbon emissions of autoclave curing vs. CO2 mineralization curing for calcium silicate boards. CO2 curing lines reduce emissions by approximately 1007 t CO2 (3097 t when sequestration is included). Even in the worst sce…
Shao-Tung Chang, Shivam Gupta, H Lee +4
This paper reports that incorporating carbon blacks and carbon nanotubes synthesized from CO2 into forward osmosis membranes significantly improves durability and performance, potentially contributing to CO2 utilization and water treatment …
Sai Krishna Reddy Velagala, Arohi Pore, Ylias Sabri +2
This paper presents a hierarchical sorbent and process optimization for carbon capture using biochar derived from deoiled cake, enhancing stability and efficiency.
Muhammad Ersa Abdullah, Boni Sena, Hendra Nur Arifin +1
This study analyzes the potential of CO2 absorption from single-cylinder gasoline engine exhaust using microalgae in a flat-panel photobioreactor via mathematical modeling. The engine emits approximately 1.545×10⁻³ kg/s of CO2, and microalg…
Czarthrya Indra Prastha, Boni Sena, Farradina Choria Suci +1
This study analyzes exhaust gas from a single-cylinder Otto engine to design a tubular photobioreactor for carbon capture using microalgae. Stoichiometric, thermodynamic, and mathematical modeling yielded a reactor volume of 3.33 L, illumin…
Ben Kravitz, Landon Yoder, Sangeet Nepal +2
Based on 63 interviews with climate experts in the US and India, this study finds 44% support for CDR deployment vs 3% for solar geoengineering, with most experts hesitant about these technologies and favoring mitigation and adaptation.
Browse by Topic